Having a garage door means keeping the door in good working order, which is essential. If the motor experiences a malfunction, it can bring issues. Look at these seven indications that your garage door motor might not be working well. If you are in doubt, contact a premium garage door manufacturer for assistance.
1. No Movement at All
When you push the button to open or stop your garage door, and nothing occurs, this is a clue that something is wrong. First, check if the power is on. The motor may be faulty if the lights work, but the door is not moving.
2. Strange Noises
If you attempt to lift or lower your garage door, pay attention. When, for example, you hear peculiar sounds such as grinding, squeaking or banging, it might be because the motor is not functioning well.
These noises often happen when parts inside the motor are worn out or damaged. For instance, gears may be jammed or run very poorly. Abnormal noises may also originate elsewhere in the garage door system (such as the tracks or springs). If you hear these sounds regularly, having an expert look at it before it gets worse is a good idea.
3. Slow Movement
This could be because the motor is worn out and losing motive, or there could be a barrier on the rails. Clean out the tracks periodically—when they become dirty and clogged, the door can be less maneuverable.
If you observe slow operation, look for obstructions first. If no obstructions are found, go for an examination by a technician.
4. Door Reverses Unexpectedly
If the garage door suddenly closes and then opens again, without any button press, then this indicates that it is no longer working well. This may also occur due to a failure of the motor to perceive obstacles in its way or a failure of its sensors.
The sensors are implemented to avoid accidents by stopping and reversing the direction of the door when you see an obstruction. If they are dirty or misaligned, they cannot work correctly. These sensors can be cleaned routinely, but if that does not help, it is necessary to have the device checked.
5. Remote Control Issues
When the remote control does not operate correctly or even work sometimes, the motor receiving the remote control might be the issue. Try to replace batteries in your remote device; a simple change of batteries may correspond to resolving the problem.
If a fresh set of batteries does not solve the problem, the problem could be the motor. It might be mechanically interacting with your remote system. A technician may have time to inspect your remote and the motor.
6. Visible Damage
Please look at your garage door and its parts from time to time. If you see any visible damage, like cracks in the motor casing or rust on metal parts, this could affect how well everything works together. If you find damage after your inspection, try as much as possible to have that repaired or replaced. Get a professional to help you.
7. Frequent Repairs Needed
Check if you call for repairs too often—like several times in just a few months. This is abnormal and could indicate that your garage door motor is failing and needs replacement soon.
Frequent repairs can mean that old parts break down more often than they should. Consider getting a new motor altogether if repairs keep happening despite regular check-ups.
Conclusion
Monitoring for the following signs can enable early detection of problems in a garage door motor. If you notice any of these issues, consider contacting a premium garage door manufacturer for help and advice on what to do next.
